CNC plant sanitation systems and equipment, tool maintenance
naky
www.diecastingpartsupplier.com
2015-07-30 15:10:06
1, the daily early morning staff as appropriate to guide the lubricant filling machine, turn on the water to FRL, air filter dust, check the air pressure machine, lubrication systems, and make a record.
2, every Saturday afternoon each day shift cleaning staff will place the machine tool spindle hole cleaning and cleaning in place, the tip must be installed when cleaning the machine, such as blowing on a spindle or live spindle taper with Buser, avoid iron , foreign bodies blown affect the accuracy of machine tools sheet metal housing, especially in some corners, it must be wiped clean.
3, always pay attention to improve health, maintain a good working environment.
4, keeping the machine clean body sides and, with oil should be cleared up, rags, gloves, etc. should not be placed in the table and chaos body.
6. heads, knives, cable Tsui long time without, must fight butter or spray anti-rust oil.
7. When long time without the machine table, spindle taper must wipe the rust preventive oil.
8. For the Company is unable to maintain the project should please professional maintenance each year, and make a record.
2, every Saturday afternoon each day shift cleaning staff will place the machine tool spindle hole cleaning and cleaning in place, the tip must be installed when cleaning the machine, such as blowing on a spindle or live spindle taper with Buser, avoid iron , foreign bodies blown affect the accuracy of machine tools sheet metal housing, especially in some corners, it must be wiped clean.
3, always pay attention to improve health, maintain a good working environment.
4, keeping the machine clean body sides and, with oil should be cleared up, rags, gloves, etc. should not be placed in the table and chaos body.
5, various types of tools to classify, neatly, promptly after use back in place, you can not mess misplacing.
6. heads, knives, cable Tsui long time without, must fight butter or spray anti-rust oil.
7. When long time without the machine table, spindle taper must wipe the rust preventive oil.
8. For the Company is unable to maintain the project should please professional maintenance each year, and make a record.