ADC 12 Material
naky
www.diecastingpartsupplier.com
2014-11-20 18:25:46
ADC12 Material
ADC= Aluminum-Alloy Die Castings
Japan's aluminum alloy grades , also known as the 12th of aluminum material , Al-Si-Cu alloy, is a die-cast aluminum alloy, suitable for cylinder head cover , the sensor bracket, cover , cylinder , etc., implementation of the standards : JIS H 5302-2000 " aluminum die casting ."
ADC12 is normally used for die cast metal buy die cast aluminium street light body，aluminium die casting.
Chinese -made alloy ADC12 equivalent code YL113, alloy grades are YZAlSi11Cu3, the implementation of standards GB / T 15115-2009. American Alloy is 383 , the implementation of standards : ASTM B 85-03 Standard Specification for Aluminum-Alloy Die Castings ( there may be more than an updated version of ASTM B 85-03 )
Japan ADC10 and ADC12, essentially reproduced with scrap aluminum , Japan has also developed a standard of scrap aluminum die-casting . Currently, China is widely used die casting alloy Y112, die-casting alloy according to the Ministry of Machinery Industry standards more appropriate to use scrap to melting, which undoubtedly can ease the contradiction ingots shortage .
ADC12 containing aluminum (Al) balance copper (Cu) 1.5 ~ 3.5, silicon (Si) 9.6 ~ 12.0, magnesium (Mg) ≤0.3, zinc (Zn) ≤1.0, iron (Fe) ≤1.3, manganese (Mn) ≤0.5, nickel (Ni) ≤0.5, tin (Sn) ≤0.3, calcium (Ca) ≤200ppm, lead (Pb) ≤0.1, cadmium (Cd) ≤0.005
ADC= Aluminum-Alloy Die Castings
Japan's aluminum alloy grades , also known as the 12th of aluminum material , Al-Si-Cu alloy, is a die-cast aluminum alloy, suitable for cylinder head cover , the sensor bracket, cover , cylinder , etc., implementation of the standards : JIS H 5302-2000 " aluminum die casting ."
ADC12 is normally used for die cast metal buy die cast aluminium street light body，aluminium die casting.
Chinese -made alloy ADC12 equivalent code YL113, alloy grades are YZAlSi11Cu3, the implementation of standards GB / T 15115-2009. American Alloy is 383 , the implementation of standards : ASTM B 85-03 Standard Specification for Aluminum-Alloy Die Castings ( there may be more than an updated version of ASTM B 85-03 )
Japan ADC10 and ADC12, essentially reproduced with scrap aluminum , Japan has also developed a standard of scrap aluminum die-casting . Currently, China is widely used die casting alloy Y112, die-casting alloy according to the Ministry of Machinery Industry standards more appropriate to use scrap to melting, which undoubtedly can ease the contradiction ingots shortage .
ADC12 containing aluminum (Al) balance copper (Cu) 1.5 ~ 3.5, silicon (Si) 9.6 ~ 12.0, magnesium (Mg) ≤0.3, zinc (Zn) ≤1.0, iron (Fe) ≤1.3, manganese (Mn) ≤0.5, nickel (Ni) ≤0.5, tin (Sn) ≤0.3, calcium (Ca) ≤200ppm, lead (Pb) ≤0.1, cadmium (Cd) ≤0.005