Дом > Новости > Новости отрасли > Anodizing
Новости
Ежедневные новости
Новости отрасли
Новости компании
Сертификация

Подарки любви в древнем Китае

Нефритовые подвески Древние китайцы, как правило, дал их любители что-то маленько...

то, что мягкая сталь

Мягкая сталь представляет собой тип углеродистой стали с низким содержанием угле...

10 Различия между предпринимателем и предпринимателем

10 Различия между предпринимателем и предпринимателем Деловые люди и предпринима...

Что такое обработка поверхности ALOCROM 1200

Что такое ALOCROM 1200обработка поверхности Alocrom 1200 - быстрыйнеэлектролитный процесс, к...

Что такое материал Kydex

Что такое Kydexматериал Kydex - это линия термопластовакрилово-поливинилхлоридные мат...

Что такое Overmolding?

Overmolding также называют 2-мя литьевым формованием в Китае. По сравнению с сторонним с...

Что такое поверхностная обработка Alodine 5200?

Что такое Alodine 5200обработка поверхности Обработка Alodine 5200 - это хроми специально ра...

Что такое оксид черного?

Черный оксид, почернение, окисление, окисление, черный пассивирующий, пистолет. , , ...

Как и когда добавить рельефы изгиба в детали из листового металла

Что такое облегчение изгиба? Облегчение изгиба - это не более двух небольших разре...

Политика конфиденциальности

Мы не будем собирать и сохранить вашу информацию в любой форме.
Свяжитесь с нами
Заместитель генерального директора: Айви
Тел: 86-13312953695
Tel: 86-755-82737317 / 82737469
Факс: 86-755-82737710
E-mail: продажа. china@xy-global.com
Почтовый индекс: 518129
Off Add: Room1702,17F, корпус № 4, парк Тяньань-Клауд, № 2018 Сюэган, округ Лунган, Шэньчжэнь.
Фабрика добавляет: промышленный район Далинг, Шалинг, город Фэнган, город Дунгуань Связаться сейчас

Anodizing

Anodizing

Jack Zou www.diecastingpartsupplier.com 2015-01-15 16:51:48
Anodizing (also spelled anodising, particularly in the UK and Australia) is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.

The process is called anodizing because the part to be treated forms the anode electrode of an electrical circuit. Anodizing increases corrosion resistance and wear resistance, and provides better adhesion for paint primers and glues than does bare metal. Anodic films can also be used for a number of cosmetic effects, either with thick porous coatings that can absorb dyes or with thin transparent coatings that add interference effects to reflected light.

Anodizing is also used to prevent galling of threaded components and to make dielectric films for electrolytic capacitors. Anodic films are most commonly applied to protect aluminium alloys, although processes also exist for titanium, zinc, magnesium, niobium, zirconium, hafnium, and tantalum. Iron or carbon steel metal exfoliates when oxidized under neutral or alkaline microelectrolytic conditions; i.e., the iron oxide (actually ferric hydroxide or hydrated iron oxide, also known as rust) forms by anoxic anodic pits and large cathodic surface, these pits concentrate anions such as sulfate and chloride accelerating the underlying metal to corrosion. Carbon flakes or nodules in iron or steel with high carbon content (high carbon steel, cast iron) may cause an electrolytic potential and interfere with coating or plating. Ferrous metals are commonly anodized electrolytically in nitric acid, or by treatment with red fuming nitric acid, to form hard black ferric oxide. This oxide remains conformal even when plated on wire and the wire is bent.

Anodization changes the microscopic texture of the surface and changes the crystal structure of the metal near the surface. Thick coatings are normally porous, so a sealing process is often needed to achieve corrosion resistance. Anodized aluminium surfaces, for example, are harder than aluminium but have low to moderate wear resistance that can be improved with increasing thickness or by applying suitable sealing substances. Anodic films are generally much stronger and more adherent than most types of paint and metal plating, but also more brittle. This makes them less likely to crack and peel from aging and wear, but more susceptible to cracking from thermal stress.

Предыдущий :
Следующий :