Huis > Nieuws > Dagelijks Nieuws > Die Casting - Draft
Nieuws
Dagelijks Nieuws
Industry News
Bedrijfsnieuws
Certificeringen

Geschenken van de liefde in het oude China

Jade hangers De oude Chinezen gaven meestal hun geliefden iets kleins, zodat ze gemakkelijk overal kan nemen. Een jade hanger is een goede keuze. Bove...

wat is zacht staal

Milde staalsoort is een soort koolstofstaal met een lage hoeveelheid koolstof - het is eigenlijk ook bekend als "staal met laag koolstofgehalte." Hoew...

10 verschillen tussen een zakenman en een ondernemer

10 verschillen tussen een zakenman en een ondernemer Zakenmensen en ondernemers hebben veel overeenkomsten. Maar ze zijn niet hetzelfde soort mensen. ...

Wat is ALOCROM 1200 oppervlaktebehandeling

Wat is ALOCROM 1200oppervlakte behandeling Alocrom 1200 is een snelniet-elektrolytisch dompelproces dat een uitstekende bescherming tegen corrosie bie...

Wat is Kydex-materiaal

Wat is Kydexmateriaal Kydex is een lijn van thermoplastacryl-polyvinylchloride materialen vervaardigd door Sekisui SPI. Het heeft een breedverschillen...

Wat is Overmolding?

Overmouleren wordt ook 2 maal spuitgieten genoemd in China. In vergelijking met de materiaalbinding door derden, maakt het overgietproces het proces s...

Wat is Alodine 5200 oppervlaktebehandeling

Wat is Alodine 5200oppervlakte behandeling Alodine 5200-behandeling is een chroomvrij product en specifiek geformuleerd voor de behandeling van alumin...

Wat is Black Oxide?

Black Oxide, zwart worden, oxideren, oxiding, zwart passiveren, gun bluing. . . deze termen verwijzen allemaal naar het proces van het vormen van een ...

Privacybeleid

We verzamelen en bewaren uw informatie in een formulier niet.

Hoe en wanneer je bochtreliëfs moet toevoegen aan plaatmetalen onderdelen

Wat is een Bend Relief? Een Bend Relief is niets meer dan twee kleine incisies gesneden in een stuk plaatwerk om het metaal tussen de twee te bevrijde...
Neem contact op
Vice General Manager: Ivy
Tel: 86-13312953695
Tel: 86-755-82737317 / 82737469
Fax: 86-755-82737710
E-mail: verkoop. china@xy-global.com
Postcode: 518129
Uit Toevoegen: Room1702,17F, Building # 4, Tianan Cloud Park, No.2018 Xuegang Rd., Longgang District, Shenzhen.
Factory Add: Daling Industrial Area, Shaling, Fenggang Town, Dongguan City Contact nu

Die Casting - Draft

Die Casting - Draft

NADCA Design 2020-05-26 23:38:06

Draft is the amount of taper or slope given to cores or other parts of the die cavity to permit easy ejection of the casting from the die casting die.

All die cast surfaces which are parallel with the opening direction of the die require draft (taper) for proper ejection of the casting from the die. This draft requirement, expressed as an angle, is not constant. It will vary with the type of wall or surface specified, the depth of the surface and the alloy selected.

The amount of draft required for holes, inside and out walls is different. Untapped holes require the most draft because the casting shrinks (while cooling) with great force around the die steel while forming the inside surface of the hole. Inside walls also are subjected to the casting shrinking onto the die steel that creates the surfaces of inside walls. Outside walls require the least amount of draft because the casting shrinks away from the die steel forming outside surfaces.

When proper draft is applied to a die casting it is much easier to open the die and also eject the casting from the die surfaces. A die that is easy to open and eject castings from will result in a more precise die casting with a higher surface quality.