Home > News > Company news > Wow! What is die casting mold?


Wow! What is die casting mold?

  • Author:Angelia
  • Source:www.diecastingpartsupplier.com
  • Release on:2017-06-30
With the progress of the times, many things in life are brought about by the convenience of science and technology, bringing convenient and efficient life to people. Now life is full of high technology. die casting mould supplier china

Die-casting mold consists of two parts, namely the cover part and the moving part, they are part of the combination is called the parting line. In the hot chamber die casting, the cover part has the gate, and in the cold chamber die is the injection port. The molten metal can enter the mold from here, the shape of which is matched to the injection chamber in the hot chamber die casting or the injection chamber in the cold chamber die casting.

The active part usually includes a push rod and a flow passage, which is a passage between the gate and the mold cavity through which the molten metal enters the mold cavity. The cover portion is normally connected to a fixed platen or front platen and the movable part is connected to a movable platen. The mold cavity is divided into two mold inserts, which are separate parts that can be removed or installed from the mold by bolts relatively easily. china Die casting parts on sales

The mold is specially designed to remain in the active part when the mold is opened. The push rod of the movable part will be pushed out of the casting, the push rod is usually driven by the pressure plate, it will accurately use the same size of the power of all the push rod at the same time, so as to ensure that the casting is not damaged.

When the castings are rolled out, the platen shrinks all the putters to recover and prepare for the next die. As the castings are still in high temperature when stripped, only the number of putters is enough to ensure that the pressure on each putter is small enough to damage the castings. But the putter will still leave traces, it must be carefully designed so that the position of the putter will not cause too much impact on the operation of the casting.

For more information, please click die casting mould Manufacturer