Laser engraving Case Study
naky
www.diecastingpartsupplier.com
2016-06-27 17:12:29
Also known as laser engraving laser engraving or laser marking, is a progressive multi-use surface treatment technology, mobile phones and electronic dictionaries with key optical principle, I have done before the products are used, it simply speaking like this:
For example, I do a keyboard with the word above him, the word blue, green, red and gray, the key is white, laser engraving, the first fuel injection, in blue, green words, red, gray spray each corresponding word color, be careful not to spray the other key, so there seems blue key, green key and other keys, and then spray the whole layer of white, so that is a piece of white keyboard, all wrapped in blue and green are the following a. Then you can be laser engraved with laser technology and a key ID diagram made film, carved out above the white oil, such as processing the letter "A", carved out of white strokes on the next or blue or green on the exposed, so that the shape of the letter keys of various colors.
And if you want to opaque, use a PC or PMMA, spray a layer of oil, carved out fonts section, the following words on the light shone through, and only then to consider the adhesion properties of various oils, do not spray oil go out on a scratch!
Because each different color key to spray oil, so when do you want to structure this in mind, to separate each key point, in order to avoid unnecessary spray to places where there are large losses as do two or more, so you can have you can support multiple.
Each color of the color to be bigger, the biggest example of black and white, so the machine is easy to distinguish, but also carve clean, so the net without carving, affecting the appearance quality, there are various color fonts do not rely too close, because spray different colors, red and green you so close by me how fuel injection, fairy difficult.