POM Performance
Nancy
www.diecastingpartsupplier.com
2014-11-27 18:10:07
POM is a surface smooth, shiny, hard and dense material , yellow or
white , thin-walled translucent part . Combustion characteristics for easy
burning from the fire continued to burn after the flame yellow top , blue bottom
, dripping melted , irritating smell of formaldehyde , fish stench .
Polyoxymethylene as a white powder , generally opaque , good color , the
proportion of 1.41-1.43 g / cc , mold shrinkage from 1.2 to 3.0 % , the molding
temperature of 170-200 ℃, drying conditions 80-90 ℃ 2 hours.Long-term heat resistance of POM is not high, but the short-term
can reach 160 ℃, which are short-term heat resistance than polyethylene POM POM
copolymer high above 10 ℃, but the long-term heat than homo- copolymer POM POM
high but about 10 ℃. Long-term use in the temperature range of -40 ℃ ~ 100 ℃ .
POM easy to decompose , the decomposition temperature is 240 degrees , the
decomposition irritating and corrosive gases occurs . It should use steel mold
corrosion resistance materials.