在宅 > ニュース > 業界ニュース > Dimensional tolerance
ニュース
デイリー·ニュース
業界ニュース
企業ニュース
認証

古代中国では愛のギフト

翡翠ペンダント 彼らは簡単にどこでもそれを取ることができるように、古代中国では通常、愛好家の小さな何かを与えました。ヒスイのペンダントは良い選択です。...

低炭素鋼とは何ですか?

低炭素鋼は炭素含有量の低い炭素鋼で、低炭素鋼としても知られています。その範囲は供給源ごとに異なるが、炭素質炭素は典型的に0.05重量%〜0.25重量%の炭素含...

ビジネスマンと起業家の違い

ビジネスマンと起業家の違い ビジネスマンと起業家は多くの類似点を持っています。しかし、彼らは同じ種類の人ではありません。 1.アイデアのオリジナリティに...

ALOCROM 1200表面処理とは何ですか?

ALOCROM 1200とは何ですか?表面処理 Alocrom 1200は急速です腐食に対する優れた保護を与える無電解浸漬法塗装されていないアルミニウムの表面に塗装されていま...

Kydexの資料とは

Kydexとは材料 Kydexは熱可塑性樹脂のラインですSekisui SPI社製のアクリル - ポリ塩化ビニル材料である。それは広い航空機の隔壁、銃器ホルスター、シース、ナ...

オーバーモールドとは何ですか?

Overmoldingは中国で2回の射出成形とも呼ばれています。オーバーモールドプロセスは、サードパーティの材料接合と比較して、プロセスをより迅速かつコスト効率よ...

Alodine 5200表面処理とは何ですか?

Alodine 5200とは何ですか?表面処理 Alodine 5200処理はクロムアルミニウムおよびその合金の処理のために特別に配合されている。スプレーまたは浸漬塗布を使用...

酸化黒とは何ですか?

黒色酸化物、黒色化、酸化、酸化、黒色不動態化、ガンブルー。 。 。これらの用語はすべて、鉄金属の表面上に黒色酸化鉄を形成するプロセスを指す。 黒色酸化物...

プライバシーポリシー

私たちはあなたの情報を収集して任意の形式で保存しません。

シートメタルパーツにベンドリリーフをどのように追加するか

曲がりの救済とは何ですか? ベンドレリーフとは、2つの小さな切開が板金に切り込まれて、2つの間に金属を解放します。それはあなたが折りたたることができる素...
お問い合わせ
副総支配人:アイビー
Tel:86-13312953695
Tel:86-755-82737317 / 82737469
ファックス:86-755-82737710
電子メール:販売。 china@xy-global.com
郵便番号:518129
Off Add:Room1702,17F、Building#4、Tianan Cloud Park、No.2018 Xuegang Rd。、Longgang District、Shenzhen。
工場は加えます:大連工業区、Shaling、Fenggang町、東莞市 今コンタクトしてください

Dimensional tolerance

Dimensional tolerance

Memory Www.xy-global.com 2018-05-09 17:35:09
Dimensional Tolerances Short-term tolerances mean the absolute value of the difference between the maximum limit size minus the minimum limit size, or the allowable upper deviation minus the difference in the deviation. The dimensional tolerance is an absolute value with no sign. Limit deviation = limit size - basic size, upper deviation = maximum limit size - basic size, lower deviation = minimum limit size - basic size. The dimensional tolerance is the allowable variation in the size of the part during the cutting process. With the same basic dimensions, the smaller the dimensional tolerance, the higher the dimensional accuracy.
During the manufacturing process of a part, due to factors such as processing or measurement, there is always a certain error in the actual size of the finished part.

In order to ensure the interchangeability of parts, the actual size of the parts must be controlled within the allowable range of variation. This allowable size variation is called dimensional tolerance.

example:

1, basic size Design given size: 30mm

2, limit size Two limit values ​​for allowable dimensional changes:

Maximum limit size=30+0.01=30.01mm

Minimum limit size = 30-0.01 = 29.99mm

3, the limit deviation limit value minus the basic size of the algebraic value. That is, the algebraic differences obtained by subtracting the basic size from the maximum limit size and the minimum limit size are the upper deviation and the lower deviation, respectively, and collectively referred to as the limit deviation. The upper and lower deviations of the holes are indicated by the capital letters ES and EI, respectively:

Upper deviation ES=30.01-30=+0.01

Lower deviation EI=29.99-30=-0.01

4, Dimensional tolerances Allowable size variation, that is, the maximum limit size minus the minimum limit size, is also equal to the algebraic difference in the upper deviation minus the deviation.

The dimensional tolerance is an absolute value with no sign.

Tolerance: 30.01-29.99=0.02

Or I0.01-(-0.01)=0.02