在宅 > ニュース > 業界ニュース > Anodizing
ニュース
デイリー·ニュース
業界ニュース
企業ニュース
認証

古代中国では愛のギフト

翡翠ペンダント 彼らは簡単にどこでもそれを取ることができるように、古代中国では通常、愛好家の小さな何かを与えました。ヒスイのペンダントは良い選択です。...

低炭素鋼とは何ですか?

低炭素鋼は炭素含有量の低い炭素鋼で、低炭素鋼としても知られています。その範囲は供給源ごとに異なるが、炭素質炭素は典型的に0.05重量%〜0.25重量%の炭素含...

ビジネスマンと起業家の違い

ビジネスマンと起業家の違い ビジネスマンと起業家は多くの類似点を持っています。しかし、彼らは同じ種類の人ではありません。 1.アイデアのオリジナリティに...

ALOCROM 1200表面処理とは何ですか?

ALOCROM 1200とは何ですか?表面処理 Alocrom 1200は急速です腐食に対する優れた保護を与える無電解浸漬法塗装されていないアルミニウムの表面に塗装されていま...

Kydexの資料とは

Kydexとは材料 Kydexは熱可塑性樹脂のラインですSekisui SPI社製のアクリル - ポリ塩化ビニル材料である。それは広い航空機の隔壁、銃器ホルスター、シース、ナ...

オーバーモールドとは何ですか?

Overmoldingは中国で2回の射出成形とも呼ばれています。オーバーモールドプロセスは、サードパーティの材料接合と比較して、プロセスをより迅速かつコスト効率よ...

Alodine 5200表面処理とは何ですか?

Alodine 5200とは何ですか?表面処理 Alodine 5200処理はクロムアルミニウムおよびその合金の処理のために特別に配合されている。スプレーまたは浸漬塗布を使用...

酸化黒とは何ですか?

黒色酸化物、黒色化、酸化、酸化、黒色不動態化、ガンブルー。 。 。これらの用語はすべて、鉄金属の表面上に黒色酸化鉄を形成するプロセスを指す。 黒色酸化物...

シートメタルパーツにベンドリリーフをどのように追加するか

曲がりの救済とは何ですか? ベンドレリーフとは、2つの小さな切開が板金に切り込まれて、2つの間に金属を解放します。それはあなたが折りたたることができる素...

プライバシーポリシー

私たちはあなたの情報を収集して任意の形式で保存しません。
お問い合わせ
副総支配人:アイビー
Tel:86-13312953695
Tel:86-755-82737317 / 82737469
ファックス:86-755-82737710
電子メール:販売。 china@xy-global.com
郵便番号:518129
Off Add:Room1702,17F、Building#4、Tianan Cloud Park、No.2018 Xuegang Rd。、Longgang District、Shenzhen。
工場は加えます:大連工業区、Shaling、Fenggang町、東莞市 今コンタクトしてください

Anodizing

Anodizing

Jack Zou www.diecastingpartsupplier.com 2015-01-15 16:51:48
Anodizing (also spelled anodising, particularly in the UK and Australia) is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.

The process is called anodizing because the part to be treated forms the anode electrode of an electrical circuit. Anodizing increases corrosion resistance and wear resistance, and provides better adhesion for paint primers and glues than does bare metal. Anodic films can also be used for a number of cosmetic effects, either with thick porous coatings that can absorb dyes or with thin transparent coatings that add interference effects to reflected light.

Anodizing is also used to prevent galling of threaded components and to make dielectric films for electrolytic capacitors. Anodic films are most commonly applied to protect aluminium alloys, although processes also exist for titanium, zinc, magnesium, niobium, zirconium, hafnium, and tantalum. Iron or carbon steel metal exfoliates when oxidized under neutral or alkaline microelectrolytic conditions; i.e., the iron oxide (actually ferric hydroxide or hydrated iron oxide, also known as rust) forms by anoxic anodic pits and large cathodic surface, these pits concentrate anions such as sulfate and chloride accelerating the underlying metal to corrosion. Carbon flakes or nodules in iron or steel with high carbon content (high carbon steel, cast iron) may cause an electrolytic potential and interfere with coating or plating. Ferrous metals are commonly anodized electrolytically in nitric acid, or by treatment with red fuming nitric acid, to form hard black ferric oxide. This oxide remains conformal even when plated on wire and the wire is bent.

Anodization changes the microscopic texture of the surface and changes the crystal structure of the metal near the surface. Thick coatings are normally porous, so a sealing process is often needed to achieve corrosion resistance. Anodized aluminium surfaces, for example, are harder than aluminium but have low to moderate wear resistance that can be improved with increasing thickness or by applying suitable sealing substances. Anodic films are generally much stronger and more adherent than most types of paint and metal plating, but also more brittle. This makes them less likely to crack and peel from aging and wear, but more susceptible to cracking from thermal stress.