Casa > Noticias > Daily News > Die Casting - Draft
Noticias
Daily News
Noticias de la Industria
Noticias de la compañía
Certificaciones

Regalos de amor en la antigua China

Colgantes de jade Los antiguos chinos por lo general dio sus amantes algo pequeño por lo que fácilmente podría llevar a todas partes. Un colgante d...

que es acero dulce

El acero suave es un tipo de acero al carbono con una baja cantidad de carbono; también se lo conoce como "acero con bajo contenido de carbono". Aunq...

10 Diferencias entre un empresario y un empresario

10 Diferencias entre un empresario y un empresario Los empresarios y empresarios tienen muchas similitudes. Sin embargo, no son el mismo tipo de perso...

¿Qué es el tratamiento de superficie ALOCROM 1200?

Qué es ALOCROM 1200tratamiento de superficies Alocrom 1200 es un rápidoproceso de inmersión no electrolítica que proporciona una excelente protecc...

¿Qué es el material de Kydex?

Qué es Kydexmaterial Kydex es una línea de termoplásticomateriales de cloruro de polivinilo acrílico fabricados por Sekisui SPI. Tiene un ampliova...

¿Qué es Overmolding?

El sobremoldeo también se denomina moldeado por inyección 2 veces en China. En comparación con la unión de materiales de terceros, el proceso de s...

¿Qué es el tratamiento de superficie Alodine 5200?

Qué es Alodine 5200tratamiento de superficies El tratamiento con Alodine 5200 es un cromoproducto libre y específicamente formulado para tratar alum...

¿Qué es el óxido negro?

Óxido negro, ennegrecimiento, oxidación, oxidación, pasivado negro, pistola azulada. . . todos estos términos se refieren al proceso de formación...

Cómo y cuándo agregar relieves de curvatura a piezas de chapa

¿Qué es un alivio de la curva? Un alivio de la curva no es más que dos pequeñas incisiones cortadas en una pieza de chapa para liberar el metal en...

Política de privacidad

No recopilaremos y almacenaremos su información en ningún formulario.
Contáctenos
Vice Gerente General: Ivy
Tel: 86-13312953695
Tel: 86-755-82737317 / 82737469
Fax: 86-755-82737710
Correo electrónico: ventas. china@xy-global.com
Código postal: 518129
Apagado Agregue: Room1702,17F, Building # 4, Tianan Cloud Park, No.2018 Xuegang Rd., Longgang District, Shenzhen.
Agregar fábrica: Daling Industrial Area, Shaling, Fenggang Town, Dongguan City Contacta ahora

Die Casting - Draft

Die Casting - Draft

NADCA Design 2020-05-26 23:38:06

Draft is the amount of taper or slope given to cores or other parts of the die cavity to permit easy ejection of the casting from the die casting die.

All die cast surfaces which are parallel with the opening direction of the die require draft (taper) for proper ejection of the casting from the die. This draft requirement, expressed as an angle, is not constant. It will vary with the type of wall or surface specified, the depth of the surface and the alloy selected.

The amount of draft required for holes, inside and out walls is different. Untapped holes require the most draft because the casting shrinks (while cooling) with great force around the die steel while forming the inside surface of the hole. Inside walls also are subjected to the casting shrinking onto the die steel that creates the surfaces of inside walls. Outside walls require the least amount of draft because the casting shrinks away from the die steel forming outside surfaces.

When proper draft is applied to a die casting it is much easier to open the die and also eject the casting from the die surfaces. A die that is easy to open and eject castings from will result in a more precise die casting with a higher surface quality.