Casa > Noticias > Noticias de la Industria > Spray forming

Noticias

Spray forming

  • Autor:Jack Zou
  • Fuente:www.diecastingpartsupplier.com
  • Suelte el:2015-01-30
Spray forming, also known as spray casting, spray deposition and in-situ compaction,is a method of casting near net shape metal components with homogeneous microstructures via the deposition of semi-solid sprayed droplets onto a shaped substrate. In spray forming an alloy is melted, normally in an induction furnace, then the molten metal is slowly poured through a conical tundish into a small-bore ceramic nozzle. The molten metal exits the furnace as a thin free-falling stream and is broken up into droplets by an annular array of gas jets, and these droplets then proceed downwards, accelerated by the gas jets to impact onto a substrate. The process is arranged such that the droplets strike the substrate whilst in the semi-solid condition, this provides sufficient liquid fraction to 'stick' the solid fraction together. Deposition continues, gradually building up a spray formed billet of metal on the substrate.