首  页 > 新闻动态 > 行业新闻 > Spray forming
证书
Certifications
精密零件供应商
联系我们
总经理:IVY
电话:86-13312953695
电话:86-755-82737317 / 82737469
传真:86-755-82737710
电子邮件:sales.china@xy-global.com
邮政编码:518129
办公地址:深圳市龙岗区雪岗北路2018号天安云谷产业园二期4栋1702室
工厂地址:东莞市凤岗镇沙岭大岭工业区联系我们

新闻动态

Spray forming

  • 作者:Jack Zou
  • 来源:www.diecastingpartsupplier.com
  • 发布时间::2015-01-30
Spray forming, also known as spray casting, spray deposition and in-situ compaction,is a method of casting near net shape metal components with homogeneous microstructures via the deposition of semi-solid sprayed droplets onto a shaped substrate. In spray forming an alloy is melted, normally in an induction furnace, then the molten metal is slowly poured through a conical tundish into a small-bore ceramic nozzle. The molten metal exits the furnace as a thin free-falling stream and is broken up into droplets by an annular array of gas jets, and these droplets then proceed downwards, accelerated by the gas jets to impact onto a substrate. The process is arranged such that the droplets strike the substrate whilst in the semi-solid condition, this provides sufficient liquid fraction to 'stick' the solid fraction together. Deposition continues, gradually building up a spray formed billet of metal on the substrate.