منزل، بيت > أخبار > صناعة الأخبار > Anodizing
أخبار
الأخبار اليومية
صناعة الأخبار
أخبار الشركة
الشهادات

هدايا الحب في الصين القديمة

اليشم المعلقات الصينية القديمة عادة ما أعطى عشاق شيء صغير بحيث يمكن أن تأخذ بسهولة...

ما هو الفولاذ الطري

الفولاذ الطري هو نوع من الفولاذ الكربوني مع كمية منخفضة من الكربون - وهو معروف في ا...

10 الاختلافات بين رجل أعمال ورجل أعمال

10 الاختلافات بين رجل أعمال ورجل أعمال رجال الأعمال ورجال الأعمال لديهم العديد من أ...

ما هو ألوكروم 1200 المعالجة السطحية

ما هو ألوكروم 1200المعالجة السطحية ألوكروم 1200 هو سريعغير-- كهربائيا تراجع العملية ال...

ما هي المواد كيدكس

ما هو كيدكسمواد كيدكس هو خط من بالحرارةالاكريليك والبولي فينيل كلوريد المصنعة من ...

ما هو Overmolding؟

يسمى أيضا overmolding 2 حقن صب مرة في الصين. مقارنة مع الترابط المادي لجهة خارجية ، فإن عم...

ما هو ألودين 5200 المعالجة السطحية

ما هو ألودين 5200المعالجة السطحية العلاج ألودين 5200 هو الكروممنتج مجاني وصاغ خصيصا ل...

ما هو اكسيد الاسود؟

أوكسيد أسود ، اسوداد ، أكسدة ، أكسدة ، تخميل أسود ، مسدس غليظ. . . تشير جميع هذه المصط...

سياسة خاصة

لن نقوم بجمع وتخزين معلوماتك بأي شكل من الأشكال.

كيف ومتى تضيف نقوش ثني إلى أجزاء معدنية ورقة

ما هو الانحناء؟ إن الإغاثة المنحنى ليست أكثر من شقتين صغيرتين مقطوعة في قطعة من ال...
اتصل بنا
نائب المدير العام: Ivy
هاتف: 86-13312953695
هاتف: 86-755-82737317/82737469
الفاكس: 86-755-82737710
البريد الإلكتروني: المبيعات. china@xy-global.com
الرمز البريدي: 518129
Off Add: Room1702،17F، Building # 4، Tianan Cloud Park، No.2018 Xuegang Rd.، Longgang District، Shenzhen.
إضافة المصنع: Daling Industrial Area، Shaling، Fenggang Town، Dongguan City اتصل الآن

Anodizing

Anodizing

Memory www.xy-global.com 2017-05-22 14:35:26
Anodizing (spelled anodising, in the UK, India and Australia) is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.

The process is called anodizing because the part to be treated forms the anode electrode of an electrical circuit. Anodizing increases resistance to corrosion and wear, and provides better adhesion for paint primers and glues than bare metal does. Anodic films can also be used for a number of cosmetic effects, either with thick porous coatings that can absorb dyes or with thin transparent coatings that add interference effects to reflected light.

Anodizing is also used to prevent galling of threaded components and to make dielectric films for electrolytic capacitors. Anodic films are most commonly applied to protect aluminium alloys, although processes also exist for titanium, zinc, magnesium, niobium, zirconium, hafnium, and tantalum. Iron or carbon steel metal exfoliates when oxidized under neutral or alkaline microelectrolytic conditions; i.e., the iron oxide (actually ferric hydroxide or hydrated iron oxide, also known as rust) forms by anoxic anodic pits and large cathodic surface, these pits concentrate anions such as sulfate and chloride accelerating the underlying metal to corrosion. Carbon flakes or nodules in iron or steel with high carbon content (high-carbon steel, cast iron) may cause an electrolytic potential and interfere with coating or plating. Ferrous metals are commonly anodized electrolytically in nitric acid or by treatment with red fuming nitric acid to form hard black ferric oxide. This oxide remains conformal even when plated on wire and the wire is bent.

Anodizing changes the microscopic texture of the surface and the crystal structure of the metal near the surface. Thick coatings are normally porous, so a sealing process is often needed to achieve corrosion resistance. Anodized aluminium surfaces, for example, are harder than aluminium but have low to moderate wear resistance that can be improved with increasing thickness or by applying suitable sealing substances. Anodic films are generally much stronger and more adherent than most types of paint and metal plating, but also more brittle. This makes them less likely to crack and peel from aging and wear, but more susceptible to cracking from thermal stress.