منزل > أخبار > صناعة الأخبار > Spray forming
الشهادات
Certifications
مورد قطع دقيقة
الاتصال بنا
نائب المدير العام: Ivy
هاتف: 86-13312953695
هاتف: 86-755-82737317/82737469
الفاكس: 86-755-82737710
البريد الإلكتروني: المبيعات. china@xy-global.com
الرمز البريدي: 518129
Off Add: Room1702،17F، Building # 4، Tianan Cloud Park، No.2018 Xuegang Rd.، Longgang District، Shenzhen.
إضافة المصنع: Daling Industrial Area، Shaling، Fenggang Town، Dongguan Cityاتصل الآن

أخبار

Spray forming

  • الكاتب:Jack Zou
  • مصدر:www.diecastingpartsupplier.com
  • الافراج عن:2015-01-30
Spray forming, also known as spray casting, spray deposition and in-situ compaction,is a method of casting near net shape metal components with homogeneous microstructures via the deposition of semi-solid sprayed droplets onto a shaped substrate. In spray forming an alloy is melted, normally in an induction furnace, then the molten metal is slowly poured through a conical tundish into a small-bore ceramic nozzle. The molten metal exits the furnace as a thin free-falling stream and is broken up into droplets by an annular array of gas jets, and these droplets then proceed downwards, accelerated by the gas jets to impact onto a substrate. The process is arranged such that the droplets strike the substrate whilst in the semi-solid condition, this provides sufficient liquid fraction to 'stick' the solid fraction together. Deposition continues, gradually building up a spray formed billet of metal on the substrate.