在宅 > ニュース > 業界ニュース > What is Thread and Knurled Edge on a Metal Screw Cap?
ニュース
デイリー·ニュース
業界ニュース
企業ニュース
認証

古代中国では愛のギフト

翡翠ペンダント 彼らは簡単にどこでもそれを取ることができるように、古代中国では通常、愛好家の小さな何かを与えました。ヒスイのペンダントは良い選択です。...

低炭素鋼とは何ですか?

低炭素鋼は炭素含有量の低い炭素鋼で、低炭素鋼としても知られています。その範囲は供給源ごとに異なるが、炭素質炭素は典型的に0.05重量%〜0.25重量%の炭素含...

ビジネスマンと起業家の違い

ビジネスマンと起業家の違い ビジネスマンと起業家は多くの類似点を持っています。しかし、彼らは同じ種類の人ではありません。 1.アイデアのオリジナリティに...

ALOCROM 1200表面処理とは何ですか?

ALOCROM 1200とは何ですか?表面処理 Alocrom 1200は急速です腐食に対する優れた保護を与える無電解浸漬法塗装されていないアルミニウムの表面に塗装されていま...

Kydexの資料とは

Kydexとは材料 Kydexは熱可塑性樹脂のラインですSekisui SPI社製のアクリル - ポリ塩化ビニル材料である。それは広い航空機の隔壁、銃器ホルスター、シース、ナ...

オーバーモールドとは何ですか?

Overmoldingは中国で2回の射出成形とも呼ばれています。オーバーモールドプロセスは、サードパーティの材料接合と比較して、プロセスをより迅速かつコスト効率よ...

Alodine 5200表面処理とは何ですか?

Alodine 5200とは何ですか?表面処理 Alodine 5200処理はクロムアルミニウムおよびその合金の処理のために特別に配合されている。スプレーまたは浸漬塗布を使用...

酸化黒とは何ですか?

黒色酸化物、黒色化、酸化、酸化、黒色不動態化、ガンブルー。 。 。これらの用語はすべて、鉄金属の表面上に黒色酸化鉄を形成するプロセスを指す。 黒色酸化物...

シートメタルパーツにベンドリリーフをどのように追加するか

曲がりの救済とは何ですか? ベンドレリーフとは、2つの小さな切開が板金に切り込まれて、2つの間に金属を解放します。それはあなたが折りたたることができる素...

プライバシーポリシー

私たちはあなたの情報を収集して任意の形式で保存しません。
お問い合わせ
副総支配人:アイビー
Tel:86-13312953695
Tel:86-755-82737317 / 82737469
ファックス:86-755-82737710
電子メール:販売。 china@xy-global.com
郵便番号:518129
Off Add:Room1702,17F、Building#4、Tianan Cloud Park、No.2018 Xuegang Rd。、Longgang District、Shenzhen。
工場は加えます:大連工業区、Shaling、Fenggang町、東莞市 今コンタクトしてください

What is Thread and Knurled Edge on a Metal Screw Cap?

What is Thread and Knurled Edge on a Metal Screw Cap?

Edith www.xy-global.com 2018-01-23 15:06:36
WHAT IS A CONTINUOUS THREADED METAL CLOSURE?

A continuous threaded closure consists of a single continuous threading system that allows metal caps to be screw on to all different types of bottle and jars. Continuous thread caps are threaded with an unbroken thread inside the lid skirt, this is different than metal lug or twist caps, which are not threaded continuously. What does that mean? Continuous thread caps have a prominent thread on the side of the cap and ridges on the top.

 WHAT IS A THREADED METAL CLOSURE MADE UP OF?

Have you ever looked at a continuous threaded metal cap and wondered how all of those little cracks and crevices are made? It may seem tricky, but there are four pieces that make up a threaded metal closure; the top surface, knurl, thread roll, and wire.
A threaded metal closure begins at the top of the closure, the ridges on the metal cap are located around the top of the cap. These ridges are called knurls. Well, what is a knurl you may ask? A knurl is the indented or crimped portion on the skirt at the top of the cap, used for holding the liner in the cap. It is also used as a grip for removing the cap.   Below the knurl is the thread roll, the thread roll is what is used to twist and turn the metal closure onto the container (its one of the most important components, since it connects the cap to the closure.) Beneath the thread roll is the wire, the wire is the last portion of the metal cap, which is the bottom portion of the cap. The wire is one of the sharpest pieces on a metal cap before it is molded. It is the tubular structure formed at the open end of the metal closure that is formed into a smooth, strong surface.

While different manufacturer have different method, metal screw cap closure with this side wall finish is often referred as "thread and knurled edge" finish. So next time when you read "thread and knurled edge", it is simply referring to the side wall feature of the metal screw cap.