在宅 > ニュース > 業界ニュース > Test mode
ニュース
デイリー·ニュース
業界ニュース
企業ニュース
認証

古代中国では愛のギフト

翡翠ペンダント 彼らは簡単にどこでもそれを取ることができるように、古代中国では通常、愛好家の小さな何かを与えました。ヒスイのペンダントは良い選択です。...

低炭素鋼とは何ですか?

低炭素鋼は炭素含有量の低い炭素鋼で、低炭素鋼としても知られています。その範囲は供給源ごとに異なるが、炭素質炭素は典型的に0.05重量%〜0.25重量%の炭素含...

ビジネスマンと起業家の違い

ビジネスマンと起業家の違い ビジネスマンと起業家は多くの類似点を持っています。しかし、彼らは同じ種類の人ではありません。 1.アイデアのオリジナリティに...

ALOCROM 1200表面処理とは何ですか?

ALOCROM 1200とは何ですか?表面処理 Alocrom 1200は急速です腐食に対する優れた保護を与える無電解浸漬法塗装されていないアルミニウムの表面に塗装されていま...

Kydexの資料とは

Kydexとは材料 Kydexは熱可塑性樹脂のラインですSekisui SPI社製のアクリル - ポリ塩化ビニル材料である。それは広い航空機の隔壁、銃器ホルスター、シース、ナ...

オーバーモールドとは何ですか?

Overmoldingは中国で2回の射出成形とも呼ばれています。オーバーモールドプロセスは、サードパーティの材料接合と比較して、プロセスをより迅速かつコスト効率よ...

Alodine 5200表面処理とは何ですか?

Alodine 5200とは何ですか?表面処理 Alodine 5200処理はクロムアルミニウムおよびその合金の処理のために特別に配合されている。スプレーまたは浸漬塗布を使用...

酸化黒とは何ですか?

黒色酸化物、黒色化、酸化、酸化、黒色不動態化、ガンブルー。 。 。これらの用語はすべて、鉄金属の表面上に黒色酸化鉄を形成するプロセスを指す。 黒色酸化物...

プライバシーポリシー

私たちはあなたの情報を収集して任意の形式で保存しません。

シートメタルパーツにベンドリリーフをどのように追加するか

曲がりの救済とは何ですか? ベンドレリーフとは、2つの小さな切開が板金に切り込まれて、2つの間に金属を解放します。それはあなたが折りたたることができる素...
お問い合わせ
副総支配人:アイビー
Tel:86-13312953695
Tel:86-755-82737317 / 82737469
ファックス:86-755-82737710
電子メール:販売。 china@xy-global.com
郵便番号:518129
Off Add:Room1702,17F、Building#4、Tianan Cloud Park、No.2018 Xuegang Rd。、Longgang District、Shenzhen。
工場は加えます:大連工業区、Shaling、Fenggang町、東莞市 今コンタクトしてください

Test mode

Test mode

Memory Www.xy-global.com 2018-04-10 16:08:37
Trial molds, or pressure test molds, or engineering test molds, are construction sites and laboratories of various institutions. Frequently used accessories for construction equipment are now divided into cast iron and plastic molds. Cast iron molds are durable and durable, but they have high recycling value, but the cost is slightly more expensive. Plastic molds are inexpensive to produce, but they are affected by the temperature of the air. Thermal expansion and contraction occur, resulting in slightly deviated test blocks. The labs, which are generally better, insist on using cast-iron test dies. However, due to their low prices, many construction sites like plastic test dies.
There are many types of test molds, including concrete test molds, mortar sand test molds, mortar test molds, impermeability test molds, flexural test molds, antifreeze test molds, unconfined tryout molds, anti-crack test molds, saturated surface test molds , Asphalt Marshall tryouts, and many more!
Trial mode refers to the test injection step that is carried out after the product is completed and before the mass production in the product development and manufacturing process. After all the parts have been assembled and assembled, it is necessary to pass the actual injection molding and obtain the injection molding samples, and then determine whether the production of the moldings completely meets the design requirements through sample inspection. If the injection molding sample completely meets the design requirements, it indicates that the mold can be produced without problems and can be put into batch injection molding production; otherwise, the mold remodeling should be performed according to the problem of sample feedback. Depending on the conditions of the changes in the mold, the mold test may be performed several times before the mass production until the mold completely corrects all the problems.