منزل، بيت > أخبار > صناعة الأخبار > Dimensional tolerance
أخبار
الأخبار اليومية
صناعة الأخبار
أخبار الشركة
الشهادات

هدايا الحب في الصين القديمة

اليشم المعلقات الصينية القديمة عادة ما أعطى عشاق شيء صغير بحيث يمكن أن تأخذ بسهولة...

ما هو الفولاذ الطري

الفولاذ الطري هو نوع من الفولاذ الكربوني مع كمية منخفضة من الكربون - وهو معروف في ا...

10 الاختلافات بين رجل أعمال ورجل أعمال

10 الاختلافات بين رجل أعمال ورجل أعمال رجال الأعمال ورجال الأعمال لديهم العديد من أ...

ما هو ألوكروم 1200 المعالجة السطحية

ما هو ألوكروم 1200المعالجة السطحية ألوكروم 1200 هو سريعغير-- كهربائيا تراجع العملية ال...

ما هي المواد كيدكس

ما هو كيدكسمواد كيدكس هو خط من بالحرارةالاكريليك والبولي فينيل كلوريد المصنعة من ...

ما هو Overmolding؟

يسمى أيضا overmolding 2 حقن صب مرة في الصين. مقارنة مع الترابط المادي لجهة خارجية ، فإن عم...

ما هو ألودين 5200 المعالجة السطحية

ما هو ألودين 5200المعالجة السطحية العلاج ألودين 5200 هو الكروممنتج مجاني وصاغ خصيصا ل...

ما هو اكسيد الاسود؟

أوكسيد أسود ، اسوداد ، أكسدة ، أكسدة ، تخميل أسود ، مسدس غليظ. . . تشير جميع هذه المصط...

كيف ومتى تضيف نقوش ثني إلى أجزاء معدنية ورقة

ما هو الانحناء؟ إن الإغاثة المنحنى ليست أكثر من شقتين صغيرتين مقطوعة في قطعة من ال...

سياسة خاصة

لن نقوم بجمع وتخزين معلوماتك بأي شكل من الأشكال.
اتصل بنا
نائب المدير العام: Ivy
هاتف: 86-13312953695
هاتف: 86-755-82737317/82737469
الفاكس: 86-755-82737710
البريد الإلكتروني: المبيعات. china@xy-global.com
الرمز البريدي: 518129
Off Add: Room1702،17F، Building # 4، Tianan Cloud Park، No.2018 Xuegang Rd.، Longgang District، Shenzhen.
إضافة المصنع: Daling Industrial Area، Shaling، Fenggang Town، Dongguan City اتصل الآن

Dimensional tolerance

Dimensional tolerance

Memory Www.xy-global.com 2018-05-09 17:35:09
Dimensional Tolerances Short-term tolerances mean the absolute value of the difference between the maximum limit size minus the minimum limit size, or the allowable upper deviation minus the difference in the deviation. The dimensional tolerance is an absolute value with no sign. Limit deviation = limit size - basic size, upper deviation = maximum limit size - basic size, lower deviation = minimum limit size - basic size. The dimensional tolerance is the allowable variation in the size of the part during the cutting process. With the same basic dimensions, the smaller the dimensional tolerance, the higher the dimensional accuracy.
During the manufacturing process of a part, due to factors such as processing or measurement, there is always a certain error in the actual size of the finished part.

In order to ensure the interchangeability of parts, the actual size of the parts must be controlled within the allowable range of variation. This allowable size variation is called dimensional tolerance.

example:

1, basic size Design given size: 30mm

2, limit size Two limit values ​​for allowable dimensional changes:

Maximum limit size=30+0.01=30.01mm

Minimum limit size = 30-0.01 = 29.99mm

3, the limit deviation limit value minus the basic size of the algebraic value. That is, the algebraic differences obtained by subtracting the basic size from the maximum limit size and the minimum limit size are the upper deviation and the lower deviation, respectively, and collectively referred to as the limit deviation. The upper and lower deviations of the holes are indicated by the capital letters ES and EI, respectively:

Upper deviation ES=30.01-30=+0.01

Lower deviation EI=29.99-30=-0.01

4, Dimensional tolerances Allowable size variation, that is, the maximum limit size minus the minimum limit size, is also equal to the algebraic difference in the upper deviation minus the deviation.

The dimensional tolerance is an absolute value with no sign.

Tolerance: 30.01-29.99=0.02

Or I0.01-(-0.01)=0.02